How To Fully Flash Your Motorola Droid To cricKet


Diag Mode

  1. Turn your Droid off
  2. Power on your Droid while holding the t button
    • You can also hold the t button while plugging the USB cable in
  3. You are now in Diag Mode

H/W Virtual Serial Port

  1. Open H/W Virtual Serial Port
  2. Click Login (the password is admin)
  3. Go to the Settings tab
    • Make sure NVT Enabled is unchecked
  4. Go to the Virtual Serial Port tab
  5. Set the IP to 192.168.16.2
  6. Set the port to 11008
  7. Click the Create COM button

CDMA Workshop

  1. Open CDMA Workshop
  2. Click the port button
  3. Select the H/W Virtual Serial Port
  4. Click Connect and then Read

Security Tab

  1. Under SPC / User Lock click SPC
  2. Send 000000

Memory Tab

  1. Write the attached droid radio unlock NV items.

NAM Tab

  1. Fill in your MIN (Account #) / MDN (Phone #)

EVDO Tab

  1. Fill in the following fields with their respective information.
    • PAP User: [email protected] (ex. [email protected])
    • PPP User: [email protected] (ex. [email protected])
    • HDR NAI: [email protected] (ex. [email protected])
    • HDR User: [email protected] (ex. [email protected])
    • HDR PPP: [email protected] (ex. [email protected])
    • Teth. NAI: [email protected] (ex. [email protected])
    • PAP Pass: cricket
    • PPP Pass: cricket
    • HDR Pass: cricket
    • HDR Pass: cricket
    • HDR PPP: cricket
  2. Click on the M.IP Profiles button

M.IP Profiles

  1. Fill in the following fields with their respective information.
    • Profiles: 1
    • Active: 0
    • Profile Enabled: Checked
    • NAI: [email protected] (ex. [email protected])
    • T.NAI: [email protected] (ex. [email protected])
    • HA Shared Secret: cricket
    • AAA Shared Secret: cricket
    • Home Address: 000.000.000.000
    • P. HA Address: 000.000.000.000
    • S. HA Address: 000.000.000.000
    • R. Interval: 1750
    • M.IP Behavior: Mobile + Simple

Other Tab

  1. Write the attached cricket PRL. (42900 is latest)

MMS

AnyCut

  1. Install anycut.apk
  2. Open anycut and create a new shortcut to APN’s
    • On your home screen you will now see an icon for APN’s
  3. Open your newly created APN’s shortcut
  4. Remove any pre existing APN’s
  5. Create a new APN with the following information
    • Name: Cricket
    • APN: internet
    • Proxy: <not set>
    • Port: <not set>
    • Username: [email protected]
    • Password: cricket
    • Server: <not set>
    • MMSC: http://mms.mycricket.com/servlets/mms
    • MMS Proxy: <not set>
    • MMS Port: <not set>
    • MCC: 310
    • MNC: 016
    • Authentication Type: PAP or CHAP
    • APN Type: *
  6. Enable your newly created APN by selecting the radio box on the APN selection screen

You must be logged in to post a comment.

© Prepaid Flash