How To Fully Flash Your LG Viper 4G LTE To cricKet


Diag Mode

  1. If you haven’t already connected your Viper 4G LTE to your PC with your USB cable, do that now.
  2. Dial ##3424#
  3. Enable Debug Mode in the menu that shows up

 

CDMA Workshop

  1. Open CDMA Workshop
  2. Click the port button
  3. Select the LG Serial Port
  4. Click Connect and then Read

 

Security Tab

  1. Under SPC / User Lock select LG Method
  2. Click Read
  3. Click SPC and Send

 

NAM Tab

  1. Fill in your MIN (Account #) / MDN (Phone #)

 

EVDO Tab

  1. Fill in the following fields with their respective information.
    • PAP User: [email protected] (ex. [email protected])
    • PPP User: [email protected] (ex. [email protected])
    • HDR NAI: [email protected] (ex. [email protected])
    • HDR User: [email protected] (ex. [email protected])
    • HDR PPP: [email protected] (ex. [email protected])
    • Teth. NAI: [email protected] (ex. [email protected])
    • PAP Pass: cricket
    • PPP Pass: cricket
    • HDR Pass: cricket
    • HDR Pass: cricket
    • HDR PPP: cricket
  2. Click on the M.IP Profiles button

 

M.IP Profiles

  1. Fill in the following fields with their respective information.
    • Profiles: 1
    • Active: 0
    • Profile Enabled: Checked
    • NAI: [email protected] (ex. [email protected])
    • T.NAI: [email protected] (ex. [email protected])
    • HA Shared Secret: cricket
    • AAA Shared Secret: cricket
    • Home Address: 000.000.000.000
    • P. HA Address: 000.000.000.000
    • S. HA Address: 000.000.000.000
    • R. Interval: 1750
    • M.IP Behavior: Simple

 

Other Tab

  1. Write the attached cricket PRL. (42900 is latest)

 

MMS

  1. Type ##data and change the MMSC to http://mms.mycricket.com/servlets/mms

You must be logged in to post a comment.

© Prepaid Flash